New strut brace

The factory strut brace wouldnt fit with the new intake, so I came up with a new one.

I had the brackets laser cut, and bent, and then I welded them up and drilled the shock tower mounting holes. The brace itself is 4130 with 1/2″ rod ends. 

The new brace will allow me to enlarge the hole in the top of the shock tower so I can get the springs out easier for doing bump steer measurements etc. I’ll prob get that cut out wed night.

Anyway…. pics

IMG_2584
IMG_2591
IMG_2593
IMG_2594

Dan

This entry was posted on Tuesday, May 4th, 2010 at 8:12 AM. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.

Comments are closed.