Fuel rail and coil mounts done
Starting to come together… Today I did the following:
- machined the fuel rail for the hold down straps
- made the fuel rail straps and welded them to the intake flange
- welded the AN bungs to the fuel rail
- everything seems to fit nicely
-
- d
- pressed the 1/4-20 studs into the valve cover
- mounted the rubber stand offs and the coils to the valve cover
-
- Installed the firewall braces
- Mounted the boost gauge bulkhead fitting to the firewall plate.
-
Im really getting down to just some final details.
Dan